3. Rough Idle or Slight Miss. Another symptom of 5.9 Cummins bad injectors is a rough idle. If the 5.9 is not idling smoothly or has a slight misfire, then it’s a sign that there’s an issue with the injector’s armature valve, plunger, or the nozzle pintle. A rough idle can be caused by a few different things, but one of the most common
diesel sprinter injector removal ( stuck injector)удаление дизельного инжектораmercedes freightliner dodge
1SLOW LMM. you just pull the metal clip out ward and pull the return line out straight up if its broken try a pick to get it out to remove the injector just undo the one bolt on the injector hold down and pull the injector straight out sometimes you need to wiggle it back and forth to get it out pretty simple.
Talk about why the injectors on a fiat ducato are hard to remove, how and why the stick and break.
G. Godzilla Discussion starter. 24 posts · Joined 2011. #1 · Apr 2, 2021. I have a 2010 Mahindra 6530 tier3, 2.5L I need to remove the injectors and get rebuilt. There is fork that hold them in with a small arm that goes down toward the engine. I tried to pull them but they would not budge. Firstly, remove the engine cover and determines which injector (s) are leaking. You should be able to hear the faulty injectors but if not, use some water or solvent on the rocker cover when the engine is running. With the engine cover off, remove the injector electrical plug and high pressure pipe. Next, clean all of the carbon from around the Removing diesel injectors requires the correct adapter for the injector to provide the greatest pulling force; Specialist Tools Australia has many kits that will screw into the head of the injector or encapsulate the injector at specific points to give the greatest pulling power, reducing the likelihood of damaging the injector, cylinder head After hours of prying, using a the Schley injector puller (only to have it bend immediately), and using a slide hammer to try and coax it straight out, it's still stuck in there. The same, only worse has happened on the drivers side. 2 came out without issue, but 4 didn't even budge with the injector puller.

Once you remove the conector and return line off the top, then loosen the Fuel rail line (19mm crows foot) and the injector side fuel line (17mm crows foot) loosen the bolt (12mm) and using various sizes of screw drivers and pry bars get between the landing pad and the injector hold down. Pry it straight up.

yeah, I just filled up last night with a full tank of biodiesel, near the end of the last tank it was seeming to get more intermittent. A sticking injector would definitely pull down fuel mileage. (4x4, warmup, and winter blend also effect it to) Back in the common snail game. 03 SO 2wd 530,000 miles and counting.
Do fuel additives work? Look What This Fuel Cleaner Did to My Customer's Car, DIY and car repair with Scotty Kilmer. How to clean fuel injectors without remo .
  • pqwkyc430u.pages.dev/325
  • pqwkyc430u.pages.dev/262
  • pqwkyc430u.pages.dev/410
  • pqwkyc430u.pages.dev/452
  • pqwkyc430u.pages.dev/498
  • pqwkyc430u.pages.dev/206
  • pqwkyc430u.pages.dev/231
  • pqwkyc430u.pages.dev/64

    • how to remove stuck diesel injectors